3. Metal V Ring

The Oyster seal  is designed for maximum spring back, and as a consequence is a low load seal. Because of the low load it will only obtain a good tightness with very soft plating or coatings.

V-ring  seals use radial slinger activity to give successful insurance against dry and wet sullying. In mix with a  metal-cased spiral seal, the V-ring diminishes wear and broadens the administration life of the oil seal and orientation. The V-ring moreover  

Application :

1) The V-Ring is regularly protracted and mounted straightforwardly on the pole .

2) It turns with the pole and seals pivotally against a stationary counter face, at right edges to the pole .

3) The counter face can be the end face of a course or a washer, packing, bearing lodging, or even the metal instance of oil seal .

4) The fixing lip is adaptable and applies just a moderately light contact weight against the counter-face but is still adequate to keep up the fixing capacity .

5) The low contact weight (that differs with the fitted width) permits the seal to run dry in numerous applications .

6) V-Rings are made altogether of elastic without fabric or sheet metal fortification. They are, in this manner, especially simple to introduce .

7) V-Rings can be extended and, contingent upon size, introduced over spines, pulleys and bearing lodgings without excessive disassembling .

8) V-Rings are accessible in different standard cross-segments to meet different space and application prerequisites.